Skip to content
Call or text604-239-8444 Call

Aldergrove · Gloucester · Otter · Bradner

Heavy machinery removal in Aldergrove

Heavy machinery removal around Aldergrove for excavators, loaders and site equipment that have done their last job, or that still work but no longer earn their keep.

A yellow excavator loaded on a lowbed trailer beside a green shed2Machines
  • Running, non-running and scrap-only machines
  • Trailer matched to the weight before we book
  • Help with the Metro Vancouver diesel registration

Rather talk? Call or text 604-239-8444

Door 2 ยท machines

Machines we take off properties around Aldergrove

Earthmoving

  • Mini excavators and full-size tracked excavators
  • Backhoe loaders
  • Crawler dozers and older graders
  • Wheel loaders and tool carriers

Compact and site gear

  • Skid steers and compact track loaders
  • Plate and roller compactors
  • Towable compressors and generators
  • Light towers, small cranes and boom lifts

Warehouse and shop machines are on the Gloucester industrial page. Tractors and farm gear are on farm equipment removal.

Weight decides the truck

Tell us the weight and we'll know what's coming

A mini excavator or skid steer often fits on the same tilt-deck truck we use for cars. A mid-size excavator needs a tag trailer. Anything heavier goes on a lowbed, and a really big machine may need it split, with the bucket or counterweight coming off.

If you don't know the weight, the model number off the machine's plate is enough for us to look it up. Add a photo of the machine from the side and one of the route out, and we can usually plan the load from that.

Machines that track or drive can load themselves. Dead ones are winched, or lifted with a second machine. Either way works; it just changes what we bring.

A yellow wheel loader parked at the edge of a paved lot
stock photo

What a machine is worth to us

It's not only the steel

Does it run and move?A working machine may have another owner waiting. A dead one is mostly metal.
Hours on the meterLow hours on a running machine count. High hours with a known problem count the other way.
Undercarriage and hydraulicsWorn tracks, sprockets and leaking cylinders are the big repair bills.
Engine tierOlder Tier 0 to Tier 3 diesels cost money every year to run in Metro Vancouver, which affects resale here.
AttachmentsExtra buckets, a thumb, forks or a breaker add to the deal.
Close view of a steel track and rollers on a crawler undercarriage
stock photo

In more detail

Selling a machine around Aldergrove: the practical side

Machines don't come with an ICBC registration, and the regional rules on old diesels change what they're worth. Here's what to have sorted.

Find the serial plate

Every machine has a plate with the manufacturer, model and serial number or PIN, usually near the operator's station or on the frame. Photograph it. It tells us the exact model and weight, and it's what goes on the bill of sale.

If the plate is missing or painted over, the serial is often stamped into the frame as well.

Prove it's yours

Without ICBC registration, ownership is shown with the original purchase invoice, a previous bill of sale, or company records showing the machine as an asset.

A business selling a machine signs as the business, so we'll need the name of the person signing and confirmation they can sign for the company.

Check for a lender's claim

Equipment is often bought on finance or a lease. Search BC's Personal Property Registry by serial number, and by the owner's name, to see if any lender has filed against it.

Leased machines belong to the leasing company, not the person using them. If it's a lease, the leasing company has to be part of the sale.

Metro Vancouver's diesel bylaw

On the Langley Township side of Aldergrove, Metro Vancouver's Non-Road Diesel Engine Emission Regulation Bylaw 1329 applies. Tier 0 to Tier 3 engines must be registered to operate, fees are charged per horsepower and rise each year, and unregistered older engines face prohibitions, with Tier 2 from February 2026 and Tier 3 from February 2027.

That's often why a machine is being sold at all. If it's been registered and you retire it for good, Metro Vancouver can refund part of the fees paid in recent years. Ask them about the retirement process once the machine is gone. Their engine registration page covers the details.

The Abbotsford side is different

The east end of Aldergrove, out to Bradner and Mount Lehman, is in Abbotsford and the Fraser Valley Regional District. Metro Vancouver's diesel bylaw doesn't apply there.

It doesn't change how we buy, but it's worth knowing if you're comparing what a buyer on each side of the line would pay for an older machine.

Getting the site ready

Clear a path from the machine to where a truck can stop. Note overhead wires, soft ground, culverts and anything the trailer can't swing past. If the machine is in a building, measure the door.

Remove anything you're keeping, like a GPS unit or tools in the cab, before the truck arrives.

Running machines may sell better elsewhere

A clean, low-hour excavator will usually fetch more at an equipment auction or through a dealer than from us. We're the better fit when it needs major work, the diesel registration makes it uneconomic, or you'd rather have it gone this week than wait months for the right buyer.

Asked and answered

Questions people ask

Do you buy excavators that don't run?
Yes. A dead excavator is still worth something for its steel and whatever parts can be reused, and we can winch it or lift it onto a trailer. Tell us the make and model, what's wrong if you know, and where it's sitting. That tells us which truck and loading method to plan.
How do you move a machine that's too heavy for a tow truck?
Heavier machines go on a tag trailer or a lowbed pulled by a highway tractor. If the machine can track or drive, it loads itself up the ramps. If it can't, it's winched or lifted with another machine. Very large machines may have the bucket or counterweight removed to bring the weight down for the road.
What paperwork do I need to sell heavy equipment in BC?
Usually a bill of sale with the serial number, proof that you own the machine, and a clear lien search from BC's Personal Property Registry. Most off-road machines aren't registered with ICBC, so there's no transfer form to sign. Plated equipment, like a truck-mounted crane, also needs the ICBC registration signed over.
Does the Metro Vancouver diesel bylaw affect selling my machine?
It can. On the Langley side of Aldergrove, older Tier 0 to Tier 3 engines must be registered and pay yearly fees to operate. That lowers what a local buyer will pay and is often the reason owners sell. Retiring a registered engine for good may also make part of your recent fees refundable through Metro Vancouver.
Can you take attachments and spare buckets too?
Yes, when they go with a machine we're buying. Extra buckets, a thumb, forks or a breaker can add to the quote, so list them. We don't buy loose parts on their own, so a pile of buckets with no machine isn't something we'd collect.
How quickly can a machine be picked up?
It depends on its size and which trailer it needs. A skid steer or mini excavator can sometimes be loaded almost as quickly as a car. A machine that needs a lowbed takes longer to schedule. We'll give you a realistic time when we quote.

Ready to clear it out?

Machine taking up yard space? Send the model and where it sits, and we'll plan the truck and the number.

604-239-8444

Call or text

Use the quote form